Serial Ethernet Adapter Ihub

Online shopping for USB Hub and Ethernet Hubs from Belkin, D-Link, Targus, IOGear, Sabrent, GWC, Anker, Tek Republic, Orico,Tripp Lite, Hootoo at Newegg.comWe.

A few weeks ago we upgraded our home security system and added ADT s Pulse service. In addition to the remote security features such as being able to monitor, arm, and disarm the system from a browser or an app on my iPhone, Pulse also introduced us to home automation via Z-Wave devices.

The heart of Pulse is the iHub, a WiFi and Z-Wave router that connects the ADT system to the internet. The ADT technicians installed the iHub in my computer closet near my cable modem and existing router. Then they fished a serial cable through the attic to the location of the alarm panel equipment and finally connected the iHub to my router via a Cat-5 cable.

The WiFi side of the iHub is encrypted with WPA2 and used for any wireless cameras you install with the system. Unfortunately, ADT only supports one model of camera, the RC8021, which has no night-vision or PTZ features. Plus, you can t just buy one from any retailer, only from ADT due to customized firmware. My existing camera setup is a lot more extensive and capable so there s really no need for me to use the ADT one that the installers brought other than it ties into the security system and mine can t. Another annoying thing about the iHub wireless is that it broadcasts its SSID as iHub_. There isn t a customer-facing web configuration page available on the iHub and no one at ADT seems to know if this can be changed or hidden. Ideally, since I m not using the WiFi features of the iHub, I d prefer to turn it off altogether.

The real focus of this post though is the Z-Wave side of the iHub. Z-Wave uses the 900MHz range of the RF spectrum so it doesn t interfere with WiFi and other devices in the more crowded 2.4GHz band and was designed with home automation in mind. Z-Wave devices form a mesh network to talk to each other and the iHub which basically means even if one device is out-of-range of the iHub, it can still send/receive commands by communicating through the other Z-Wave devices that it is in range of.

My initial ADT install came with a single appliance/lamp module but since then I ve installed two dimmer switches and two outlets and also added two outdoor plugs for the Christmas lights and landscape lighting and another lamp module. Adding a device to the existing network is pretty simple: on the Pulse web site you select the device type being added which puts the iHub in discovery mode for 45 seconds. Then you press the pairing button usually the on/off switch on the Z-Wave device and it s added to the network. Even though Z-Wave is an industry standard, ADT only supports certain makes/models like with the WiFi cameras so I went with the GE devices, all readily available from Amazon.

I got to experience the mesh network benefit of Z-Wave first hand during my rollout. Unlike lamp modules which plug into an outlet so they can be near the iHub during pairing, one electrical outlet and one dimmer switch I installed were too far away to be initially paired. To work around this I purchased the GE 45601 Z-Wave remote control, which could be paired with the iHub to be used as an inclusion controller. Basically, once the remote was part of my Z-Wave network I was able to pair the far devices the outlet and switch to the remote, which then relayed the pairing to the iHub when I brought it back into range. Then after refreshing the Z-Wave network, the other devices in the house were able to see and route to those further devices and include them in the network. Pretty sweet. Another benefit of having the inclusion controller is that it allows for advanced programming of the GE Z-Wave devices. By changing the values stored in registers you can control, for example, the speed of dimming, or even turn off the annoying bright blue LED with the device is off nice for a switch in a common area, but annoying in a bedroom at night.

Once the mesh network was in place I started building my home automation schedule on the ADT Pulse web site. You can create recurring schedules turn on the family room lamp every Monday and Thursday at 6pm and turn it off at 10pm or automations when the back door is opened, turn on the rear landscape lighting. Since my Z-Wave network is integrated with the security system I also have the option of only triggering events when the system is in a certain state i.e., armed or when system events happen like a burglar alarm. I have found some complex scenarios you can t create through Pulse, though, such as combining the alarm status and time of day ex. if the alarm goes off after 9pm, turn on the inside lights. Also, you can t set schedules or automations as inactive so if you have a schedule for when you re away on vacation, you ll have to delete those events when you re back from your trip and then re-create them for your next vacation.

In addition to controlling my Z-Wave network from the Pulse web site, I can also control the devices from the ADT Pulse app on my iPhone. Simple rocker switches allow me to turn lights on or off, and even control the dimmer settings:

In conclusion, I m pretty happy with Z-Wave and the automation it s allowed me to add to my home. I ll be sure to add updates to the comments on this post as I learn more or run into problems.

Popular Movies. Star Wars: The Force Awakens 2015 The Martian 2015 Ant-Man 2015 Jurassic World 2015 Mad Max: Fury Road 2015 The Hateful Eight 2015.

Access and manage remote

USB devices from everywhere.

Download Free

Compatible with Windows up to 7.x, 8.x

Revolutionary service for connecting remote USB

devices via Internet or LAN. Get a single point of

control for all USB ports and devices connected to

your remote computers.

Access USB on Any Computer

With FlexiHub you can use any USB device in real time no matter if it is located in the next room, at home while you are at the office, or even overseas. Different machines with your USB devices attached are referred to as nodes which can be accessed remotely right away.

Connect and Disconnect USB Remotely

FlexiHub lets you manage USB devices remotely - connect to them and then disconnect without your physical presence on the remote side. Any remote USB nodes can be accessed from your current location totally securely thanks to encrypted communication.

Automatic Detection of Device Type

For your convenience, USB device type is detected and displayed automatically printer, phone, HID, etc. So you always know for sure which device to connect to, or on the contrary, which USB device should be secured from remote access, if needed.

Access Management

You can block any USB device connected to your computer so that it cannot be used remotely with the help of FlexiHub. Locked USB device will not be displayed on the remote node, so nobody will be able to connect to it without your permission.

Good Reasons to Choose FlexiHub

Exclusive Technology of USB Sharing

FlexiHub uses unique mechanisms of sharing USB devices over Internet or LAN. Thus they become available for usage on remote machines. Now you can freely access USB dongle plugged into your home PC while being at office, or connect to any USB device which your colleagues from another office shared for remote debugging.

Totally Secure Connection

FlexiHub deploys advanced security for communications - 256-bit SSL encryption. It enables extra layer of protection for data transfer. Due to this maximal encryption security you do not need to worry about your sensitive data when using USB devices remotely.

Private Communication Server

Since FlexiHub can send traffic through its own Redirection Server, your computers do not necessarily need a real IP address. Though your local computer will not directly see the other computer with the USB device plugged into it, thanks to FlexiHub you can still connect to this USB device remotely and use it.

Traffic Compression

Traffic compression during USB data transfer helps speed up interaction with certain types of USB devices and reduce Internet traffic. This may be useful for those USB devices which transfer data in uncompressed format, like scanners. You can choose between best speed and best size traffic compression depending on your needs.

8 Mar 2011 – DHCP is configured to use both DNS and Gatway 192.168.1.1 If you are trying to assign clients on the 192.168.1.1 network, you can do so and the social.

I have played extensively with the ADT Pulse system. I have the premier package. If you are able to obtain the installer code for your alarm system not the ihub you.

Telkonet Gateway – AG5: The Telkonet Gateway is a remotely manageable network interface that converts Ethernet connections to a power line carrier signal and.

Access remote USB devices and share USB over Network

Share USB and Serial port over Network, access and manage remote USB and COM port devices from everywhere with FlexiHub.