Serial 0.92 Modems
- The CR6 measurement and control datalogger is a powerful core component for your data-acquisition system. We combined the best features of all our dataloggers and.
- Jamestown Pellet stoves burn cleanly, produce tons of heat, and require little maintenance. And people who own pellet stoves absolutely love them.
- Right-Angle, Thru-Hole Part Number 202303-1 Loose Piece Performance Data USB Connector System Voltage Rating 30VAC rms Current Rating Signal application.
- Signaling for modems. The DTR signal is an important call control signal for a data modem. According to the RS232 standard, dropping DTR from active to inactive for.
- DATA HEET The multifunctional and affordable AP-205H access point AP combines high-performance wireless mobility with wired Gigabit Ethernet access in a.
Who could be a better inspiration than this famous composer. True, the idea for the name of the hostel we got in a very simple way – the name of the street where.
Sensors
The CR6 has 12 U terminals and four C terminals that are programmable for a variety of functions. This allows the CR6 to measure virtually any sensor, including voltage, resistive bridge, static vibrating wire, pulse, switch closure, SDI-12, and serial RS-232/RS-485.
Measurement Control Peripherals
The CR6 includes an interface that allows it to connect directly with our CDM device the SC-CPI interface is not required. The CR6 is also compatible with all of our contemporary SDMs, multiplexers, terminal input modules, and relays.
Communications
The CR6 has an on-board 10/100baseT port for Ethernet communication, a USB port for communication with a PC, and a slot to store data on a microSD card. Compatible telemetry devices include our multidrop modems, short-haul modems, phone modems land line, digital cellular, and voice-synthesized, RF telemetry, and satellite transmitters Argos, High Data Rate GOES, and Meteosat. Data can be viewed on the CR1000KD Keyboard Display, CD100 Mountable Display with Keyboard, or an iOS or Android device requires LoggerLink.
Enclosures
The CR6 and its power supply can be housed in any of our standard enclosures.
Power
The CR6 uses an external power source and has a built-in charger/regulator. Intelligent power sourcing autoselects the highest voltage from three input sources Chg, Bat, or USB to operate in one of the following four modes:
UPS recommended - A 16 to 32 Vdc source, solar panel or power converter, is used to charge a 12 Vdc battery, such as our BP7, BP12 or BP24.
12 Vdc battery or other reliable 12 Vdc source
Chg only - DC power supply 16 to 32 Vdc
USB - powered over 5 Vdc USB port for setup, programming, and testing will not charge battery or boost USB power to provide 12 Vdc to SW12 or 12V Power Output terminals
Software
CRBasic, the CR6 s full programming language, supports simple or complex programming and many on-board data reduction processes. Compatible software includes:
LoggerNet version 4.3 or higher
DevConfig version 2.10 or higher
PC400 version 4.3 or higher
PC200W version 4.3 or higher
Short Cut version 3.1 or higher
CRBasic version 3.5 or higher
LoggerLink version 1.3 or higher
RTDAQ version 1.2 or higher
LNDB version 1.2 or higher.
Torrent Name AGE FILES SIZE; Desktop Wallpapers - Miscellaneous 1920x1200-2560x1600 111 pcs. 10.1.2016 Date: 01/10/16 in.
CR6 Measurement and Control Datalogger